BOOK MY CHAIRS

Office Chair Repairing and servicing in Pune At your DOORSTEP

Bookmychairs provide Office chair repairing service at your doorstep. Bookmychairs gives your old chair a new look. You don’t have to search a shop near you our technician visit your office or home gives you proper Inspection and Estimation of your chair.

office chair repair

To Repair or Refurbish a chair you need to identify the problem in your office chair While Repairing it

If 

1. Base Cracked (broken legs)

5 prong legs used in office chairs for making balance on the floor or on the other hand it help castors to easy mobility of movement in premises. which Attached above the castors and not only helps to move here and there but also for balancing in the floor

2. Castors not rolling Properly

Wheel also known as castors. Attached with base used for the movement of the chair. When chair stop moving or rolling then we have to change the castors

3. Hydraulic (gas lift ) not working

A drive technology where a fluid used to move the energy, If your Chair is not going up and down (not lifting  ) then we have to change the hydraulic.

4. Mechanism not Working

Ergonomic chairs have different types of mechanisms.

Push back: Used for comfort. Push back mechanism is moves in the 0:1 ratio which helps in giving movement to your back.

Syncro : Syncro mechanism moves in the 1:2 ratio. syncro mechanism helps users to move along with seat and back in 1:2 ratio.

Tilt Mechanism: Basically its is a backward tilt mechanism suitable for long hours. Chairs back seat can tilted too and fro. The tilting mechanism not only adjusts the angle of the seat but also reduces the pressure on the lower back.

if your chair seat not balancing (sinking Seat ) then you have to change chair mechanism.

5. Handle Broken

Every chair has set of two handles. Which helps to support our arms while we are working. There are Different types of arms for example fixed arms or adjustable and generally, they replaced in sets

6. Dirty upholstery 

Dirty worn-out fabric, cracked rexine torn fabric, or torn net needs to refurbished completely.

 

Need to Know Measure and Minor Issues when Repairing Office Chair

Measure issues

  • We change the complete part in terms of measure issues For Example
  • If chair parts gets Damaged
  • Non-working hydraulic or mechanism
  • Unusable Upholstery
  • Cracked Wheels or base

Minor Issue

  • In terms of minor issues like
  • Loose hardware can tightened and refixed
  • Dirty chairs can cleaned or refurbished
  • Cranky noise can reduced or eliminated by doing basic servicing like oiling 
  • Kindly do service and refixing of hardware and cleansing of fabric if needed on regular basis

Chair parts Guidance

Office Chair Repair Service at Pune

Bookmychairs provide repair services for your office chairs in Pune. Therefore You don’t have to search a shop near you our technician visit your office or home gives you proper Inspection and Estimation of your chair.

First, you have to Fill up this form After that Our technician will get back to you. 

You can Easily Find Out the problem in your office chair after knowing the following points.

1. Base Cracked (broken legs)

5 prong legs used in office chairs for making balance on the floor or on the other hand it help castors to easy mobility of movement in premises. which Attached above the castors and not only helps to move here and there but also for balancing in the floor

2. Castors not rolling Properly

Wheel also known as castors. Attached with base used for the movement of the chair. When chair stop moving or rolling then we have to change the castors

3. Hydraulic (gas lift ) not working

A drive technology where a fluid used to move the energy, If your Chair is not going up and down (not lifting  ) then we have to change the hydraulic.

4. Mechanism not Working

Ergonomic chairs have different types of mechanisms.

Push back: Used for comfort. Push back mechanism is moves in the 0:1 ratio which helps in giving movement to your back.

Syncro : Syncro mechanism moves in the 1:2 ratio. syncro mechanism helps users to move along with seat and back in 1:2 ratio.

Tilt Mechanism: Basically its is a backward tilt mechanism suitable for long hours. Chairs back seat can tilted too and fro. The tilting mechanism not only adjusts the angle of the seat but also reduces the pressure on the lower back.

if your chair seat not balancing (sinking Seat ) then you have to change chair mechanism.

5. Handle Broken

Every chair has set of two handles. Which helps to support our arms while we are working. There are Different types of arms for example fixed arms or adjustable and generally, they replaced in sets

6. Dirty upholstery 

Dirty worn-out fabric, cracked rexine torn fabric, or torn net needs to refurbished completely.

office chair repair

Book Your Technician By Filling This Form


Need to Know Measure and Minor Issues when Repairing Office Chair

Measure issues

  • We change the complete part in terms of measure issues For Example
  • if chair parts gets Damaged
  • Non-working hydraulic or mechanism
  • Unusable Upholstery
  • Cracked Wheels or base

Minor Issue

  • In terms of minor issues like
  • Loose hardware can tightened and refixed
  • Dirty chairs can cleaned or refurbished
  • Cranky noise can reduced or eliminated by doing basic servicing like oiling 
  • Kindly do service and refixing of hardware and cleansing of fabric if needed on regular basis

Want to Exchange Your old Chair With New One?

Dont worry Bookmychairs have some Buy Back offers for you. 

Our location

You can replace your old chair with new one with our selected items available in offer.

 

Cart

No products in the cart.